Car body shop repairing works: spot welding with "L" and "C" gun; single sided and twin spot welding; welding of nails and washers for sheet straightening (spotter function); localised heating with carbon electrode; screws and rivets welding, sheet-metals spotting.
By means of the inverter technology that allows a constant and high welding current, not influenced by the variation of the supply voltages and by the secondary circuit conditions, the quality of the spot is improved also on galvanized sheets. The high current value allows to reduce welding time resulting in a longer electrodes life. The reduced absorption balanced on the three phases reduces the connecting and consumption costs.
Analog welding control unit with potentiometer, with two independent programs, welding time adjustment in cycles, pulses, welding current adjustment and compensation function.
The welding station is supplied equipped with:
|Number of programs||2||2|
|Mains voltage/frequency*||400V 50Hz||400V 50Hz|
|Nominal power at 50%||kVA||25||25|
|Short circuit secondary current||kA||9||12|
|Welding current on steel 1+1||kA||9||12|
|Secondary current at 100%||kA||1.25||1.25|
|No load secondary voltage||V||14||15|
|Mains cables section L=15m||mm2||10||10|
|Max. compressed air pressure||bar||8||8|
* Different voltages and frequencies on request
|Smart gun: patented pneumatic gun with adjustable stroke and double-function trigger: 1)only clamping, 2)welding, when the force at electrodes is correct.
Item 8677 22 mm
Water cooled pneumatic gun. Electrode force 30-240 daN. Standard and large gap arms item 5127...5137.
|Item 3575 - Multifunction gun for the welding of screws, pins, washers, rivets and single spot. Cable L=2500 mm
Item 7638 - Percussion extractor.
Star electrode for straightening.
|Item 3578 - Earth cable with brass clamp, L=2500 mm.|
Kit of consumable material; electrode for single-spot welding of pins, screws, washers and rivets, carbon electrode for localized heating; star electrode for sheets straightening.
Air and water cooled twin spot gun.
Hand-operated C type gun, with air cooling. Reduced overall dimensions. Cables length 1600 mm. Electrode force 30-80 daN
Pneumatic C-type gun water-cooled:
Item 8659 - C gun
|Item 3454 - water cooled cables L=2400 mm, 150 mm2 section, for L type gun|
Item 3455 - water cooled cables L=2400 mm, 150 mm2 section, for C type gun
=Standard =Upon request
Specifications subject to change without notice.