BENCH LINEAR ACTION RESISTANCE WELDERS - ITEMS 2121-2126 - 32 TO 63 kVA AT 50% 

212x photoMAIN WELDER FEATURES
bullet Built-in compressed air filter unit.
bullet Electrodes speed control valves, shock absorber for end of stroke and air discharge silencers assuring the minimum noise.
bullet Lubrication free pneumatic components to eliminates oil mist and to protect the environment.
bullet Cylinder with chrome plated stem for heavy duty works and long life; adjustable anti-rotation device.
bullet Cylinder with double stroke with key control.
bullet Water-cooled transformer, plates, electrode-holders and electrodes.
bullet Transformer with epoxy resin coated windings.
bullet TE180 microprocessor control unit. Phase shift welding current adjustment. Synchronous SCR contactor insulated from cooling water circuit with protection thermostat.
bullet Two stage electric foot control for clamping and welding pieces only if correctly positioned. The foot control is standard on spot welder models only (on request on projection models).
bullet Pre-setting for additional double stage electric foot connection for the direct recalling of welding program no.2 (not on welders equipped with option 2161).
bullet Two-hand safety control with timer for maximum safety, and removable key selector, standard on all models. The push-buttons of the two hand control are standard on projection models only (on request on spot welder models).
 

TECHNICAL DATA
 

ITEM 2121 2122 2123 2124 2125 2126
Spot welder • - • - • -
Projection welder - • - • - •
Nominal power at 50% kVA 32 32 50 50 63 63
Maximum welding power kVA 83 90 110 120 200 218
Short circuit current kA 23 25 27 29 35 38
Maximum welding current on aluminium kA 20.9 22.7 24.5 26.3 31.8 34.5
Maximum welding current on steel kA 18.4 20 21.6 23.2 28 30.4
Thermal current 100% A 5100 5100 7000 7000 6200 6200
No load secondary voltages V 4.4 4.4 5 5 7.1 7.1
Supply voltage 50Hz * V 400 400 400 400 400 400
Cables section L=30 m mm2 25 25 35 35 50 50
Delayed fuses A 63 63 100 100 125 125
Minimum gap mm 155 125 155 125 155 125
Maximum gap mm 285 225 285 225 285 225
Depth L mm 200 - 200 - 200 -
Depth D mm - 200 - 200 - 200
Max. electrode force (6 bar)  daN 300 470 470 470 470 470
Maximum stroke mm 80 80 80 80 80 80
Double stroke - standard mm 60 60 60 60 60 60
Compressed air supply bar 6.5 6.5 6.5 6.5 6.5 6.5
Air for 1000 spots (6 bar)             
stroke 20 mm Nm3 1.7 2.6 2.6 2.6 2.6 2.6
max. stroke Nm3 5.4 8.7 8.7 8.7 8.7 8.7
Air supply hose  mm 10 10 10 10 10 10
Water cooling  l/min 6 6 6 6 6 6
Aerial noise produced dB(A) < 70 < 70 < 70 < 70 71 < 70
Measure conditions            
working stroke mm 20 50 20 50 20 50
welding time cycles 10 21 14 29 7 14
welding current kA 17.2 19 20 22 26.2 29
working rating in welds/min   15 6 15 6 15 6
Net weight (approximately) kg 165 167 170 172 185 187
* Different voltages and frequencies on request

OPTIONS:
bullet 2160 Constant current welding control unit item TE185.
bullet 2161 Rotary selector for recalling the welding programs on the front side of the welder (this disables the second welding foot control).

 

Specifications subject to change without notice