TE 95 is a microprocessor welding control unit designed for cable resistance welders for car body shops. Differently from a standard control unit, TE 95 carries out two different working cycles for gun and multifunction gun; moreover, the multifunction gun working cycle is equipped with the sheets heating function. The TE 95 can be used for welders with both pneumatic and hand-operated gun.
MAIN FEATURES
 |
Synchronous thyristor drive with phase shift control for welding current adjustment. |
|
Simplified programming by means of four buttons. |
|
Adjustment of first phase shift delay to obtain the best balance of machine line current. |
|
Control of solenoid valve 24 Vdc 7,2 W Max with protected output against any short circuit. |
|
Separate working cycles for gun and multifunction gun. |
GUN WORKING CYCLE
|
Slope and pulse functions. |
|
Secondary current compensation function for welding of oxidised sheets and rods. |
|
Autoretain disabling for manually operated welders. |
MULTIFUNCTION GUN WORKING CYCLE
|
Welding time and welding current adjustment independent from gun adjustments. |
|
Sheets heating function. |
PROGRAMMABLE PARAMETERS
| PARAMETER |
RANGE |
| Gun parameters: | |
| SQUEEZE | 01 - 50 cycles |
| SLOPE | 00 - 29 cycles |
| WELD TIME* | 01 - 65 cycles |
| CURRENT | 01 - 99 % |
| COLD TIME | 01 - 50 cycles |
| IMPULSE NUMBER | 00 - 09 |
| HOLD TIME | 01 - 50 cycles |
| COMPENSATION | 00 - 01 |
| WELD / NO WELD | 00 - 01 |
| Multifunction gun parameters: | |
| WELD TIME | 01 - 50 cycles |
| CURRENT | 01 - 99 % |
| HEATING | 00 - 01 |
Specifications subject to change without notice.