The TE751 is a medium frequency welding controller, it may work with constant current and fix operating modes.

te751

It is possible to store up to 150 different welding programs. Each program comprises several programmable parameters that describe the work cycle. In addition to the plain 4-stage welding cycle, the control unit allows the running of welding processes with pre-welding current, post-welding current, slope and pulses. 

 

MAIN TECHNICAL FEATURES

  • Easy programming through 9 keys and backlit graphic LCD display.
  • Inverter command with medium frequency IGBT, with possibility of choosing the operating frequency of the inverter between 1000 Hz and 4000 Hz.
  • Storage of 150 welding programs, up to 15 which may be called from the outside.
  • Up to 16 programmable parameters for each program.
  • Current slope up, current slope down, impulses, pre-weld, post-weld functions and adjustment of the welding times with 1 ms resolution.
  • Display of welding current RMS and percentage use of the machine.
  • 2 operating modes: constant current and FIX.
  • Current limits and percentage use of the inverter.
  • Double stroke function.
  • Stepper function to compensate the wear of the electrodes with programmable curves.
  • Single and automatic cycle.
  • WELD / NO WELD function.
  • Two-hand control function.
  • Management of three 24 Vdc max 5W solenoid valve with self-protected output.
  • Self-adjustment to the mains frequency 50/60 Hz.
  • Communication (optional) through RS232 or USB port.
  • Selectable languages: Italian, English, French, German, Spanish, Hungarian, Swedish, Dutch, Czech or Portuguese.
  • Possibility of updating control unit firmware.
  • Programme sequence.
  • Possibility of graphically displaying welding time and current.
  • Possibility of consulting weld tables.

 

DOWNLOADS

Available downloads for this product:

 Specifications subject to change without notice.