HAND OPERATED SPOT GUN ITEM 7900 – 2 kVA

• Light and proved spot gun for car body repair.
• Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
• Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets.
• Force adjustment with scale in daN.
• Additional arm couplings to provide larger opening between arms.
• All transformer are coated with F class insulation material that does not dry out and become brittle. Test are made using 4000 volts.
• Supplied complete with 125 mm arms.
• Large choice of arms and electrodes.

HAND OPERATED SPOT GUN ITEM 7902 – 2.5 KVA

• Versatile portable spot welder for auto body repair shops and maintenance shops.
• Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
• Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets.
• Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar.
• Cos fi control.
• Force adjustment with scale in daN.
• Additional arm couplings to provide larger opening between arms.
• All transformer are coated with F class insulation material. Test are made using 4000 volts.
• Supplied complete with 125 mm arms.
• Large choice of arms and electrodes.
• Pulsation weld time control available (P version).

WATER COOLED PORTABLE SPOT GUN ITEM 7903 – 6 KVA

• For high operating rate works in car body repair and light production works in Industry.
• Fully water-cooled portable spot gun to be used with arms item 7512 – 7513 – 7514 – 7515 on request.
• Versatile portable spot welder for auto body repair shops and maintenance shops.
• Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
• Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets.
• Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar.
• Cos fi control.
• Force adjustment with scale in daN.
• Additional arm couplings to provide larger opening between arms.
• All transformer are coated with F class insulation material. Test are made using 4000 volts.
• Large choice of arms and electrodes.
• Pulsation weld time control available (P version).